print page


• Liquid for removal of metals
• Effective at any рН value, increases efficiency of filtration

Field of use:

The reagent is used to remove from water ions of iron, manganese, copper and other metals.

Physicochemical parameters:

Appearance Transparent colourless liquid
Content of active reactant, %, min 30
Concentration of hydrogen ions, рН, units, max 2,0
Density, g/cm3 1,160±0,050


The reagent should be used only as directed, following this instruction.


While filling the pool with water (before shock chlorination) add the reagent to the water in the ratio of 400 ml per 50 m3 of water with the filtration system in operation. With regular treatment on a weekly basis, while adding fresh water, add the reagent in the same ratio - 400 ml per 50 m3 of water.
Note: If concentration of metals in the water is higher than 1.5 mg/l the dose should be doubled. Dosage of reagents should be increased or decreased depending on the water temperature, hardness, intensity of pool use, etc.


Use means of protection for skin, eyes and respiratory organs while working with the reagent. Persons under 18 years old are not allowed to work with the reagent. Avoid contact with skin and eyes. Swallowing of the reagent must be avoided. It is necessary to observe the rules of personal hygiene while working with the reagent; you must not smoke, drink or eat while using the reagent. Wash face and hands with water and soap after working with the reagent.

First aid measures:

In case of breach of safety measures while handling the reagent, irritation of the eyes and respiratory organs can occur as well as skin redness and itching. If the reagent gets into the eyes, rinse them immediately with running water and consult a doctor if necessary. If any of the reagent is swallowed, the patient should drink at least several glasses of water and must see a doctor as soon as possible.


Store the reagent in a closed ventilated dry place at temperatures from 5 оC up to 30 оC out of reach of children, away from foodstuffs. Shelf life in the original package - 12 months from the production date. The production date is indicated on the package.


1 L, 5 L.

Download PDS