print page

SetiFlock Ultra L300

• Liquid coagulant – ultra-formula
• Crystal clear water
• Economical to use
• Most effective for public swimming pools

Field of use:

The reagent is used for treatment and clarification of turbid water.

Physicochemical parameters:

PARAMETER NORM
Appearance The reagent is used for treatment and clarification of turbid water
Content of active reactant, %, min 17
Concentration of hydrogen ions, рН, units 2,0-4,0
Density, g/cm3 1,355±0,050

Application:

The reagent should be used only as directed, following this instruction. The agent should be used with neutral pH level 7.0-7.4 and amount of free chlorine at 0.3-0.6 mg/dm3. The reagent should be pre-dissolved in a separate container and poured out to the pool along its perimeter with the circulation system in operation. In 20-30 minutes disconnect the circulation pump and leave for 12 hours. After this, clean the sediment from the bottom with the help of a vacuum cleaner.

Dosage:

Depending on the water contamination level, add the reagent to the water in the ratio of 25-50 ml per 10 m3 of water once a week. The proposed dosages should be considered as general recommendations. Dosage of reagents should be increased or decreased depending on the water temperature, hardness, intensity of pool use, etc.

Precautions:

Use means of protection for skin, eyes and respiratory organs while working with the reagent. Persons under 18 years old are not allowed to work with the reagent. Avoid contact with skin and eyes. Swallowing of the reagent must be avoided. It is necessary to observe the rules of personal hygiene while working with the reagent; you must not smoke, drink or eat while using the reagent. Wash face and hands with water and soap after working with the reagent.

First aid measures:

In case of breach of safety measures while handling the reagent, irritation of the eyes and respiratory organs can occur as well as skin redness and itching. If the reagent gets into the eyes, rinse them immediately with running water and consult a doctor if necessary. If any of the reagent is swallowed, the patient should drink at least several glasses of water and must see a doctor as soon as possible.

Storage:

Store the reagent in a closed ventilated dry place at temperatures from 5 оC up to 30 оC out of reach of children, away from foodstuffs. Shelf life in the original package - 12 months from the production date. The production date is indicated on the package.

Packaging:

1 L, 5 L, 20 L.

Download PDS